• 4 settings in forward, to be set up with the touch pad on the back side of the tool
• Slow mode to approach without impacting (hand tightening around 3.7 ft.lbs / 4-5 Nm)
• Fast mode to tighten wheels close to recommended torque without overtightening (around 50 ft.lbs / 70 Nm)
• 50%: around 425 ft.lbs / 580 N
• 100% of maximum torque around 850+ ft.lbs / 1150+ Nm
• 1 setting @ full power in reverse 850+ ft.lbs / 1150+ Nm
• 5 bumpers all around the tool, 1 in front of the clutch housing
• Brushless motor
• 4 Front LED lights for dark spaces
• Single-hand forward and reverse operation plus safety locking position
• Soft thermoplastic rubber grip
• The CP8849 Series is to be used as a snugging tool to come close to the car manufacturer’s specified torque rating
• The final tightening should be done with a calibrated torque wrench, this way, we ensure the end of overtightening
• Torque results could vary greatly depending on the type of wheel and many other factors
WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
(California Prop 65)